Nylon anchor, RND
RND nylon dowel, screw Ø 2.6–4.0 mm, 5 x 25 mm
For securing components using wood screws, chipboard screws or metric screws
Art.-no.
090300525
EAN 4029484146444
Prices for customers after login
Show availability in RECA shop
In order to check the stock in a RECA branch, please log in.
If you have any questions, please call our service hotline at 0800 7322667.
You are not yet a RECA customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 40,000 products
For securing components using wood screws, chipboard screws or metric screws
Application area:
For securing
extractor hoods, aluminium and copper sheet, surface-mounted boxes, pictures, letter boxes, clothes rails, curtain rails, towel rails, lights, metal brackets, racks, pipe clamps, skirting boards, temperature sensors etc.
to
concrete, lightweight concrete, solid brick, sand-lime brick, plaster, natural stone and other pressure-resistant solid materials, also for use outdoors or in wet rooms in conjunction with stainless steel screws.
Advantages:
- High temperature resistance from -40 °C to +100 °C
- Chemical-resistant
- Pre-positioned and in-place installation possible
- Can also be used with metric screws such as steel screws, threaded bolts and threaded rods
- The drive-in support enables the screw to be pre-assembled and prevents premature expansion of the anchor
- Lateral braces prevent turning in the drill hole
- Can also be delivered in RECA dispenser box
Advice:
- The specified holding power refers to the use of wood screws with max. diameter
- The effective anchorage depth of the anchor must be maintained
- The drilling method and drill hole cleaning must be adjusted to the material
- The recommended loads only apply to installation in the material and not installation in joints
- Approved anchors must be used for safety-relevant attachments
Product information
Datasheets(X)
Type description | RND 5 |
Drill hole depth | 35 mm |
Required bolt diameter (metric) | M3 |
Anchor diameter x anchor length (l) | 5 x 25 mm |
Required wood screw diameter (d scr.wood) | 2,6 - 4 mm |
Material | PA 6 - Polyamide |
Nominal drill hole diameter | 5 mm |
Anchor diameter | 5 mm |
Anchor length (l) | 25 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!