For detailed information, other images and documents, please select individual articles from the following table.
VMU plus Polar chemical injection mortar
Injection system for universal use in cracked and non-cracked concrete (ETA-11/0415), and masonry made from solid brick and perforated brick (ETA-13/0909) at low temperatures
Available in 2 versions
Prices for customers after login
Register now and access more than 40,000 products
Variants
Register now and access more than 40,000 products
Injection system for universal use in cracked and non-cracked concrete (ETA-11/0415), and masonry made from solid brick and perforated brick (ETA-13/0909) at low temperatures
The VMU plus Polar injection system is a bonded anchor system for the winter season, comprising the two-component,
styrene-free composite mortar VMU plus Polar and various system components that must be used depending on the building material and application.
Field of Application:
For anchoring heavy loads such as steel beams, steel supports, brackets, awnings,
façades, canopies etc. in cracked and non-cracked standard concrete with a strength class ≥ C20/25 and ≤ C50/60, masonry made of solid brick and perforated brick.
Advantages:
- Just one chemical injection mortar for virtually all applications, ensuring greater flexibility
- Reduced stock and increased application reliability
- Approved for cracked (M 8 to M 30) and non-cracked concrete (M 8 to M 30)
- Approved for use in wet concrete and boreholes that are filled with water (M 8 to M 16)
- Approved for solid and perforated brick masonry
- Approved for conventional threaded rods with proven strength (acceptance test certificate 3.1)
- Substrate temperature during application: -20°C to +10°C (concrete)
- Ambient temperature once fully cured: -40°C to +120°C (in concrete)
- Variable anchoring depths for added flexibility
- Fire protection test
- Opened cartridges can continue to be used with a new mixer nozzle.
- Styrene-free 2-component vinyl ester-based mortar
- Approved for use during seismic activity in performance category C1 (M 8 to M 30)
- Products bearing the NSF logo have been tested and registered by the National Sanitary Foundation (NSF for short). The NSF offers the only international accreditation that guarantees that the product can be used in the food industry without posing any health risks.
- Fast and reliable curing even at low and freezing temperatures
- Approved for cracked and non-cracked concrete, and masonry, even at freezing processing temperatures of -20°C
- Approved temperature range of +10°C to -20°C for borehole and cartridge temperatures No need to laboriously heat the cartridge before processing and then keep it warm
- Identical European Technical Assessment (ETA 11-0415 and 13-0909) for VMU plus and VMU plus Polar, permitting installation at a borehole temperature of between +40°C and -20°C without re-assessment
Advice:
The tubular film cartridge (0911 004 300) must be cut open before use. To do this, pull the foil on the thread outwards and cut using scissors.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!