Wind brace band
Wind brace band CE, galvanised steel, packaged 40x1.5x50,000
1.5 mm
Art.-no.
0681013040
EAN 4029484813674
Prices for customers after login
Show availability in RECA shop
In order to check the stock in a RECA branch, please log in.
If you have any questions, please call our service hotline at 0800 7322667.
You are not yet a RECA customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 40,000 products
1.5 mm
1.5 mm wind brace band is used for diagonal bracing of roof and wall constructions.
Application area:
Diagonal bracing of roof and wall structures
Advantages:
- CE marking in line with EN 14545
- 25 % lower weight for easier handling
- High tensile strength due to patented edge shaping and use of high-quality steels
Advice:
The 1.5 mm wind brace band can be applied directly to the rafter top. Ensure that wind and tensile forces are correctly transferred to the roof structure. The wind brace band is secured with anchor nails. At least two nails must be attached at each rafter crossing point. Edge clearances and centre to centre distances must be observed for nails. Multiple wind brace bands can be arranged side by side to distribute stronger forces. The fasteners used must comply with EN 14592.
Suitable fasteners are:
• Anchor nails to EN 14592 (article no. 0681 040 ...)
Product information
Datasheets(X)
Width x thickness | 40 x 1.5 mm |
Length of roll | 50 m |
Diameter of hole | 5 mm |
Weight | 22 kg |
Approval | EN 14545:2009-02 |
Min. yield strength (ReH) | 350 N/mm² |
Min. tensile strength Rm | 420 N/mm² |
Min. breaking elongation A80 | 16 % |
Material | Steel |
Material designation | S350GD |
Surface | Hot dip galvanized |