Welcome to RECA Germany For trade customers only

TT plastic spacer

TT spacer, plastic, 7.00 mm

Art.-no. 0217099307
EAN 4029484495306

Prices for customers after login

Show availability in RECA trade store
Exclusively for trade customers

Register now and access more than 40,000 products


RECA TT spacers enable terrace boards to be laid easily and precisely. The bolt determines the spacing of the boards to one another. No additional spacer is needed. The resulting ventilation of the terrace boards leads to the terrace lasting considerably longer.

Consumption:
Approx. 21 pieces per m²

Application area:


Terrace boards should be laid with a gap of at least 5 mm and ideally 7 mm. For woods that contain a high level of wood moisture during installation (e.g. as is often the case with Bankirai) and contract significantly afterwards, a spacing of 4 mm may be used. This prevents the formation of excessive gaps. This approach must not be taken with woods that are extremely dry during installation. At the starting side of the first board, the RECA TT spacer is broken off at the predetermined breaking point and used. Under the other side of the board and for all other boards, RECA TT spacers are placed fully underneath and the boards screwed down. The boards should be screwed down so that the terrace screws are driven through the punch-outs, fixing them into place. For the end board, RECA TT spacers are broken off as with the first board and put into position.

Field of Application:


RECA TT spacers are used in terrace construction, gardening and landscaping.

Advice:


Patent pending. Always comply with the rules for structural wood protection.
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Size

7

Height

4 mm

Material

Plastic

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
sebS ultra A2 raised countersunk head self-drilling screw with milling pockets

sebS TT drill. screw, rais. cs head, mill. pckts f. terrace cons. A2, TX 20 5x40

x 250
TT countersink drill bit

TT countersink drill bit (drill in line with DIN 338), 4.00 mm

x 1
TT plastic spacer

TT spacer, plastic, 4.00 mm

x 50
RUSPERT® zinc-plated TT levelling foot

TT compensating foot, galvanised, RUSPERT®, 40 x 65

x 20
TT underlay pad made of rubber granules

TT underlay pads made of rubber granulate Contents: 50 pieces 90 x 90 x 20

x 1
Non-woven abrasive rolls

Abrasive fleece roll, grain 320/very fine, brown 115 mm x 10 m

Non-woven abrasive rolls 10 m
x 1
Vision full-vision safety goggles

Vision full-vision goggles with wide rubber band, clear polycarbonate lens

x 1
EVO 1/4 inch TXW bit

EVO bit, 1/4 inch, 25 mm, TXW 20

x 12
1/4 inch INOX bit holder, E 6.3

Stainless steel bit holder 1/4, E 6.3 50 mm

x 1
The packaging unit (EU) indicates the number of items in a box, which corresponds to the packaging of the product. Here you specify the desired quantity of UE.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information