TSM steel zinc-plated screw anchor with M10 male thread and hexagon drive
Screw anchor with external thread TSM 6x40 ET M10x20 AF 13
Drill - screw in - done
Register now and access more than 40,000 products
Drill - screw in - done
The screw anchor is an innovative fastening system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Advantages:
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Attachment can be fully removed again
- No torque control required
- Broad range of uses due to numerous versions
- Stylish look with countersunk hexagon head
Datasheets(X)
 | |
External drive | WS13 |
Type description | TSM 6x40 M10-20 AF13 |
Anchor size | 6 |
Anchor length (l) | 40 mm |
Construction product | Yes |
Thread diameter | 7.5 mm |
Nominal drill-bit diameter (d 0) | 6 mm |
Surface | Zinc plated |
Material | Steel, case-hardened |
Washer diameter | 19.0 mm |
Max. recommended power output for setting tool | 160 Nm |