MULTI-MONTI plus screw anchor, MMS plus-SS A4 hexagon head
MULTI-MONTI-plus MMSplus-SS screw anchor, hex head, A4, SW15 12x105
Drill, screw in, done
Art.-no. 0901612105
EAN 4029484806324
Register now and access more than 40,000 products
Drill, screw in, done
The concrete screw anchor is an innovative anchoring system for securing assembly parts to concrete. With its cutting-teeth design, the concrete screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Application area:
For securing
staircase railings, grilles, beams, brackets, metal structures, formwork supports, cable conduits, pipes, mounting rails, ventilation ducts, suspended ceilings, sprinkler systems etc.
to
normal weight concrete with a strength class of at least C20/25 and up to maximum C50/60, solid sand-lime brick, hollow sand-lime brick, masonry brick and lightweight concrete. (Note the types and dimensions)
Advantages:
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
- Broad range of uses due to numerous versions
- Stylish look with hexagon head
Datasheets(X)
 | |
Type description | MMS-plus SS hexagon head with pressed-on washer |
Anchor diameter x anchor length (l) | 12 x 105 mm |
Nominal drill-bit diameter (d 0) | 10 mm |
Max. attachment height (t fix) | 15 mm |
Surface | Plain |
Surface of the tip | Phosphated |
Material | Stainless steel A4 |
External drive | WS15 |
Approval | Yes |
Washer diameter | 22.5 mm |
Min. centre-to-centre distance (s min) | 40 mm |
Min. edge clearance (c min) | 40 mm |
Minimum component thickness for concrete (h min) | 150 mm |
Through-hole in the component to be connected (d f) | 14.5 mm |
Max. recommended power output for setting tool | 600 Nm |