KWS fire protection filler
RECA KWS fire protection filler, cartridge, 310 ml
Register now and access more than 40,000 products
The KWS fire protection filler is an ablative, highly viscous and non-hydroscopic, water-based fire protection coating. It is a construction material consisting mainly of chemically/physically active substances and binders.
Application area:
The KWS fire protection filler is a system component for creating the KWS cable, pipe or combination soft stop fire system EI 90. For the adhesive bonding of the mineral fibreboard components and for sealing larger joints and residual openings within the soft stop fire system or between the soft stop fire system and the component.
System component for creating the KWS continuous collar partition system for sealing the ring gap between the component and continuous collar. The width of the ring gap must not exceed 10 mm.
The KWS fire protection filler can be applied using a trowel or directly from the cartridge.
Advantages:
Solvent-free, APEO-free, no VOC emissions
Free from halogen, formaldehyde, borate and plasticisers
Oil- and petrol-resistant
Suitable for indoor areas, damp rooms and covered outdoor areas (without driving rain)
Resistant to ageing, mechanically resistant
Flexible after drying even with thick layers
Temperature-resistant up to -20 °C after drying
Advice:
Please observe the respective proof of use before installation and fit according to specifications!
Datasheets(X)
Container | Cartridge |
Contents | 310 ml |
Colour | White |
Viscosity/consistency | High viscosity |
Shelf life from production | 18 Month |
Conditions to maintain shelf life from production | at 5°C to 30°C |
Building material class | B2 - Normally inflammable |
Ultraviolet resistance | Yes |
pH value | 7,45–7,55 |
Min./max. moulded density | 1.28-1.45 g/cm³ |
Min./max. processing temperature | 8 to 30 °C |
Number of pieces per covering box | 20 PCS |