Gate holder for floor mounting
Gate holder 1307.07 for base fixture, hot-dip galvanised
Made from malleable iron, for gates up to 100 kg
Art.-no.
7223246037
EAN 4029484214181
Prices for customers after login
Show availability in RECA shop
In order to check the stock in a RECA branch, please log in.
If you have any questions, please call our service hotline at 0800 7322667.
You are not yet a RECA customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 40,000 products
Made from malleable iron, for gates up to 100 kg
Advice:
The gate is automatically locked by pressing on the locking device. Pressing gently on the catch hook releases the gate again.
Installation:
The gate holder is attached at the required locking point, the maximum distance to be maintained from the hinge, with four screws, using install anchors. The holding bracket is fastened to the gate at the appropriate place with vertical clearance of 4 mm from the locking device stop plate so that the screw holes are underneath the catch hole. When the gate is locked into position, the holding bracket thus also serves as a locating surface.
Product information
Datasheets(X)
 | |
Load capacity | 100 kg |
Width | 56 mm |
Depth | 106 mm |
Height | 100 mm |