Flap wheel with shaft
Flap wheel w/shaft combined abrasive cloth and non-woven material 80x50x6mm
Register now and access more than 40,000 products
Field of Application:
Shoulder-free matting, line matting, satin finish and removal of dirt and oxide layers on stainless steel, steel and non-ferrous base metals.
Depending on the material used, it is possible to achieve a wide variety of matt and semi-gloss effects on steel, chrome steel, copper, brass, light metal and other materials.
Advantages:
A better sanding effect is achieved by using additional abrasive cloth between the non-woven abrasive
Mixed corundum made from corundum and synthetic corundum
Synthetic resin-bonded flaps, attached radially to the axis
Advice:
Please note: Pay attention to the direction of rotation! Tools are only suitable for clockwise rotation!
General working instructions:
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain.
Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing.
If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Datasheets(X)
Diameter | 80.0 mm |
Width | 50.0 mm |
Grid size | 180/150 |
Adapter diameter | 6 mm |
Recommended rotation speed | 4000 rpm |
Max. rotation speed | 7000 rpm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!