Tension anchor KR
For detailed information, other images and documents, please select individual articles from the following table.
Available in 2 versions
Prices for customers after login
Exclusively for trade customers
Register now and access more than 40,000 products
Variants
Exclusively for trade customers
Register now and access more than 40,000 products
Type KR
Type KR tension anchors are a one-piece, high load-bearing tension anchor system for base anchoring in wood, steel or concrete substrates.
They are extremely robust due to the special construction.
Application area:
Base anchoring of supports, purlins, timber frame constructions or solid wood elements
Advantages:
- European Technical Approval (ETA-13/1060)
- Extremely high load-bearing capacities
- Large base plate for optimised force transfer into the ground
- Single-piece anchor system
- Indirect fastening (max. 26 mm) via an intermediate layer (e.g. OSB)
- Extra-long back panel for optimal positioning of the required number of nails, while complying with the required edge distances on the wooden frame
Advice:
Nail holes with a diameter of 5 mm are provided on the long side for fastening the KR tension anchors. In the case of tensile loading, the mounting hole in the base of the bracket is equipped with a stud anchor for connecting the bracket. The fasteners used for the type KR tension anchors must comply with EN 14592.
Suitable fasteners are
in wood:
• Anchor nails to EN 14592 (article no. 0681 040 ...)
in concrete:
• Stud anchors BZ Plus (article no. 0910 2.. ...) in conjunction with washer
DIN 440 (ISO 7094) (article no. 0459 ...)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!