For detailed information, other images and documents, please select individual articles from the following table.
Available in 2 versions
Prices for customers after login
Register now and access more than 40,000 products
Variants
Register now and access more than 40,000 products
The EPDM film is an elastic elastomer membrane made from EPDM rubber. The 1.2 mm-thick version is used to seal the exterior bottom connections of doors and floor-level windows in outer walls and conservatories. The 0.75 mm-thick version of the EPDM film is ideal for external sealing of construction elements in the façade area and for sealing underneath window sills.
Advantages:
- Water-repellent but permeable to water vapour
- Highly elastic
- Outstanding resistance to UV and weathering
- Extreme temperature resistance
- Fulfils all legal requirements:
Sealing complies with DIN 18195
Complies with DIN 7864-T1 table 1
- Shelf life 'unlimited' at +5°C to +25°C
Design:
Without self-adhesive strips
Advice:
(Several application methods exist in practice)
1. Cut the RECA EPDM film to the desired length.
2. Glue the surfaces to be bonded using EPDM film adhesive (0898 800 010) by applying the film adhesive to the base material in a bead of approx. 5 mm without interruption.
Please note: The adhesive properties of EPDM films may vary so it is always advisable to perform tests beforehand.
3. Place the EPDM film on the adhesive layer without applying pressure and then press it carefully (e.g. using a pressure roller).
The surfaces must be capable of bearing loads and free of oils, greases, dust and dirt. Not suitable for sealing against pressurised water. Cannot be plastered or painted over.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!